The short answer
Diagnose first. An oven that will not heat, a burner that stays cold or a door that will not close usually has one failed part behind it, and one part on an otherwise sound wall oven, range or cooktop is normally worth repairing.
Our $99 service call fee covers the diagnosis. You get the exact repair price after diagnosis, before any work begins, and you compare that number with the price of a comparable new range or wall oven. Damage to the oven cavity or frame is the one fault that points to replacing.
Repair vs. replace at a glance
| Factor | Repair | Replace |
|---|---|---|
| Cost to find out | $99 service call, which covers the diagnosis. | The price of a comparable new range. |
| What the price is based on | The part that failed and the labor to replace it, quoted after diagnosis and before any work begins. | The model you choose: size, features and finish set the price, not the fault. |
| Installation and fit | A wall oven, slide-in range or cooktop stays fitted to its cabinet cutout, countertop or wall. | A new wall oven or cooktop has to match the cutout and the connection; a freestanding range is the easiest to swap. |
| How many major parts have failed | One failed part on an otherwise sound oven, stove or range is a normal repair. | Several major components failing at the same time make a repair harder to justify. |
| Parts availability | A part we can get is a repair we can quote. | Parts that are discontinued or on a long backorder tip the decision toward replacing. |
| Warranty | 60-day parts and labor warranty on the completed repair. | Whatever warranty comes with the new unit. |
What to weigh before you decide
- What failed. A bake or broil element, temperature sensor, burner switch, door hinge or gasket is one part. The control board, elements and sensors failing together is a different situation.
- Which type you have. A built-in wall oven, slide-in range or cooktop is fitted to your cabinets, which tips a single-part fault toward repair. A freestanding range is simpler to replace.
- The cavity and frame. An oven cavity or frame that is damaged beyond a part swap is when replacing makes more sense.
- The quote against the price of a comparable new range or wall oven. We give you the exact repair price after diagnosis so the comparison is real.
- Parts availability for your model. Discontinued parts or a long backorder change the answer.
Usually worth diagnosing and repairing
These are the everyday oven, stove and range repairs: one failed part, replaced on site, with the appliance staying in its cutout.
- An oven not heating: a bake or broil element, an oven temperature sensor or a control board.
- An oven temperature that is inaccurate: an oven temperature sensor or a control board.
- A burner not working on an electric cooktop: a coil burner, a glass-cooktop radiant element or a burner control switch.
- An oven door that won't close: a door hinge, a door gasket or door glass.
- An oven that won't turn off or a self-clean cycle that no longer runs on an otherwise sound oven.
- A convection or cooling fan motor, an indicator light or switch, a drip bowl or a terminal block.
- A built-in wall oven or slide-in range fitted to your cabinets.
When replacement may make more sense
- The oven cavity or frame is damaged beyond a part swap.
- The control board, elements and sensors are failing together.
- The repair quote comes close to the price of a comparable new range.
Parts for your model that are discontinued or on a long backorder also tip the decision toward replacing. We tell you which case you are in after the diagnosis, before anything is quoted or done.
A note on gas models. The decision works the same way for a gas, electric or dual-fuel model: one failed part on a sound oven or range is normally worth repairing, and the door, hinge, gasket, glass and most controls are the same on both. The burner and ignition parts differ, so tell us which type you have when you book. If you smell gas when attempting to use the oven, or at any time near the appliance, do not operate the oven, do not operate any electrical switches, and do not attempt to light the oven manually. Leave the area, ventilate without using fans, and contact your gas utility's emergency line from outside the building.
What it costs to find out
Our $99 service call fee covers the diagnosis. Diagnostic fee waived when the repair is completed. You get the exact repair price after diagnosis, before any work begins.
Typical total repair cost (parts + labor): $150–$500
Estimated labor by repair group on our oven repair page, labor only, parts extra: Controls & sensors $99–$249; Parts & mechanical $99–$249. Parts are quoted separately after diagnosis.
| Repair | Estimated labor (parts extra) |
|---|---|
| Bake element replacement (no bottom heat) | $179–$249 |
| Oven temperature sensor replacement | $99–$199 |
| Oven door hinge replacement (door won’t close) | $199–$249 |
| Electric burner control switch replacement | $99–$199 |
60-day parts & labor warranty
See the full estimated labor table by repair on our oven repair page. Book online and save $25 on a completed repair.
Ready to find out? Book online or call the number above, and read more about our oven, stove and range repair in Buffalo.